This browser is not recommended for use with smartdevicelink.com, and may not function properly. Upgrade to a different browser to guarantee support of all features.
To Top
To Bottom
Enumerations
KeyboardEvent
| Name | Value | Description |
|---|---|---|
| KEYPRESS | 0 | |
| ENTRY_SUBMITTED | 1 | |
| ENTRY_VOICE | 2 | |
| ENTRY_CANCELLED | 3 | |
| ENTRY_ABORTED | 4 | |
| INPUT_KEY_MASK_ENABLED | 5 | |
| INPUT_KEY_MASK_DISABLED | 6 |
FuelCutoffStatus
| Name | Value | Description |
|---|---|---|
| TERMINATE_FUEL | 0 | |
| NORMAL_OPERATION | 1 | |
| FAULT | 2 |
TransportType
| Name | Value | Description |
|---|---|---|
| BLUETOOTH | 0 | |
| USB_IOS | 1 | |
| USB_AOA | 2 | |
| WIFI | 3 | |
| CLOUD_WEBSOCKET | 4 | Websocket connection used to connect to remote cloud application |
EventTypes
| Name | Value | Description |
|---|---|---|
| PHONE_CALL | 0 | Phone call is active |
| EMERGENCY_EVENT | 1 | Active emergency event, active parking event |
| DEACTIVATE_HMI | 2 | GAL/DIO is active |
| AUDIO_SOURCE | 3 | Navigated to audio(radio, etc) |
| EMBEDDED_NAVI | 4 | Navigated to navigation screen |
ButtonPressMode
| Name | Value | Description |
|---|---|---|
| LONG | 0 | A button was released, after it was pressed for a long time. Actual timing is defined by head unit and may vary |
| SHORT | 1 | A button was released, after it was pressed for a short time. Actual timing is defined by head unit and may vary |
VRCommandType
| Name | Value | Description |
|---|---|---|
| Choice | 0 | Types that expound the current AddCommand should be processed as a choice for initiated PerformInteraction request for current active on HMI |
| Command | 1 | Types that expound the current AddCommand should be processed as a common command for current application on HMI |
AppHMIType
| Name | Value | Description |
|---|---|---|
| DEFAULT | 0 | |
| COMMUNICATION | 1 | |
| MEDIA | 2 | |
| MESSAGING | 3 | |
| NAVIGATION | 4 | |
| INFORMATION | 5 | |
| SOCIAL | 6 | |
| BACKGROUND_PROCESS | 7 | |
| TESTING | 8 | |
| SYSTEM | 9 | |
| PROJECTION | 10 | |
| REMOTE_CONTROL | 11 | |
| WEB_VIEW | 12 |
CloudConnectionStatus
| Name | Value | Description |
|---|---|---|
| NOT_CONNECTED | 0 | No active websocket session or ongoing connection attempts |
| CONNECTED | 1 | Websocket is active |
| RETRY | 2 | Websocket connection failed and retry attempts are ongoing |
WayPointType
| Name | Value | Description |
|---|---|---|
| ALL | 0 | All waypoints including destination |
| DESTINATION | 1 | Only destination |
SpeechCapabilities
| Name | Value | Description |
|---|---|---|
| TEXT | 0 | Uses plain text for performing TTS |
| SAPI_PHONEMES | 1 | Uses the Speech API Phoneme representation of a phrase for performing TTS |
| LHPLUS_PHONEMES | 2 | Uses the LH+ Phoneme representation of a phrase for performing TTS |
| PRE_RECORDED | 3 | |
| SILENCE | 4 | |
| FILE | 5 | Uses an audio file sent to SDL via a PutFile RPC to perform TTS or play generic sounds in conjunction with TTS |
TextFieldName
| Name | Value | Description |
|---|---|---|
| mainField1 | 0 | The first line of first set of main fields of the persistent display (applies to "Show") |
| mainField2 | 1 | The second line of first set of main fields of the persistent display (applies to "Show") |
| mainField3 | 2 | The first line of second set of main fields of persistent display (applies to "Show") |
| mainField4 | 3 | The second line of second set of main fields of the persistent display (applies to "Show") |
| statusBar | 4 | The status bar on NGN (applies to "Show") |
| mediaClock | 5 | Text value for MediaClock field (applies to "Show") |
| mediaTrack | 6 | The track field of NGN and GEN1.1 MFD displays. This field is only available for media applications (applies to "Show") |
| templateTitle | 7 | The title of the new template that will be displayed; applies to "Show" |
| alertText1 | 8 | The first line of the alert text field (applies to "Alert") |
| alertText2 | 9 | The second line of the alert text field (applies to "Alert") |
| alertText3 | 10 | The third line of the alert text field (applies to "Alert") |
| scrollableMessageBody | 11 | Long form body of text that can include newlines and tabs (applies to "ScrollableMessage") |
| initialInteractionText | 12 | First line suggestion for a user response (in the case of VR enabled interaction) |
| navigationText1 | 13 | First line of navigation text |
| navigationText2 | 14 | Second line of navigation text |
| ETA | 15 | Estimated Time of Arrival time for navigation |
| totalDistance | 16 | Total distance to destination for navigation |
| audioPassThruDisplayText1 | 17 | First line of text for audio pass thru |
| audioPassThruDisplayText2 | 18 | Second line of text for audio pass thru |
| sliderHeader | 19 | Header text for slider |
| sliderFooter | 20 | Footer text for slider |
| menuName | 21 | Primary text for Choice |
| secondaryText | 22 | Secondary text for Choice |
| tertiaryText | 23 | Tertiary text for Choice |
| menuTitle | 24 | Optional text to label an app menu button (for certain touchscreen platforms) |
| locationName | 25 | Optional name / title of intended location (applies to SendLocation) |
| locationDescription | 26 | Optional description of intended location / establishment (applies to SendLocation) |
| addressLines | 27 | Optional location address (applies to SendLocation) |
| phoneNumber | 28 | Optional phone number of intended location / establishment (applies to SendLocation) |
| timeToDestination | 29 | Optional time to destination field for ShowConstantTBT |
| turnText | 30 | Turn text for turnList parameter of UpdateTurnList |
| subtleAlertText1 | 31 | The first line of the subtle alert text field; applies to SubtleAlert alertText1 |
| subtleAlertText2 | 32 | The second line of the subtle alert text field; applies to SubtleAlert alertText2 |
| subtleAlertSoftButtonText | 33 | A text field in the soft button of a subtle alert; applies to SubtleAlert softButtons |
| menuCommandSecondaryText | 34 | Secondary text for AddCommand |
| menuCommandTertiaryText | 35 | Tertiary text for AddCommand |
| menuSubMenuSecondaryText | 36 | Secondary text for AddSubMenu |
| menuSubMenuTertiaryText | 37 | Tertiary text for AddSubMenu |
MetadataType
| Name | Value | Description |
|---|---|---|
| mediaTitle | 0 | This field contains the title of the current audio track. |
| mediaArtist | 1 | This field contains the artist/creator of the current audio track. |
| mediaAlbum | 2 | This field contains the album title of the current audio track. |
| mediaYear | 3 | This field contains the creation year of the current audio track. |
| mediaGenre | 4 | This field contains the genre of the current audio track. |
| mediaStation | 5 | This field contains the name of the current media source. |
| rating | 6 | This field contains a rating of some form. |
| currentTemperature | 7 | This field contains the current temperature. |
| maximumTemperature | 8 | This field contains the maximum temperature for the day. |
| minimumTemperature | 9 | This field contains the minimum temperature for the day. |
| weatherTerm | 10 | This field contains the current weather (cloudy, clear, etc.). |
| humidity | 11 | This field contains the current humidity value. |
AmbientLightStatus
| Name | Value | Description |
|---|---|---|
| NIGHT | 0 | |
| TWILIGHT_1 | 1 | |
| TWILIGHT_2 | 2 | |
| TWILIGHT_3 | 3 | |
| TWILIGHT_4 | 4 | |
| DAY | 5 | |
| UNKNOWN | 6 | |
| INVALID | 7 |
StatisticsType
| Name | Value | Description |
|---|---|---|
| iAPP_BUFFER_FULL | 0 |
VehicleDataEventStatus
| Name | Value | Description |
|---|---|---|
| NO_EVENT | 0 | The system does not have the adequate information to send valid YES or NO states |
| NO | 1 | The requested event is in NO state |
| YES | 2 | The requested event is in YES state |
| NOT_SUPPORTED | 3 | The requested data is not supported |
| FAULT | 4 | The module/sensor is currently faulty |
KeyboardLayout
| Name | Value | Description |
|---|---|---|
| QWERTY | 0 | |
| QWERTZ | 1 | |
| AZERTY | 2 | |
| NUMERIC | 3 |
MenuLayout
| Name | Value | Description |
|---|---|---|
| LIST | 0 | |
| TILES | 1 |
ButtonEventMode
| Name | Value | Description |
|---|---|---|
| BUTTONUP | 0 | A button has been released |
| BUTTONDOWN | 1 | A button has been pressed |
VrCapabilities
| Name | Value | Description |
|---|---|---|
| TEXT | 0 |
TextAlignment
| Name | Value | Description |
|---|---|---|
| LEFT_ALIGNED | 0 | |
| RIGHT_ALIGNED | 1 | |
| CENTERED | 2 |
DeviceState
| Name | Value | Description |
|---|---|---|
| UNKNOWN | 0 | |
| UNPAIRED | 1 |
SystemContext
| Name | Value | Description |
|---|---|---|
| MAIN | 0 | The app's persistent display (whether media/non-media/navigation) is fully visible onscreen There is currently no user interaction (user-initiated or app-initiated) with the head-unit |
| VRSESSION | 1 | The system is currently in a VR session (with whatever dedicated VR screen being overlaid onscreen) |
| MENU | 2 | The system is currently displaying a system or in-App menu onscreen |
| HMI_OBSCURED | 3 | The app's display HMI is currently obscuring with either a system or other app's overlay (except of Alert element) |
| ALERT | 4 | Broadcast only to whichever app has an alert currently being displayed |
SoftButtonType
| Name | Value | Description |
|---|---|---|
| TEXT | 0 | |
| IMAGE | 1 | |
| BOTH | 2 |
DriverDistractionState
| Name | Value | Description |
|---|---|---|
| DD_ON | 0 | |
| DD_OFF | 1 |
MethodName
| Name | Value | Description |
|---|---|---|
| ALERT | 0 | |
| SPEAK | 1 | |
| AUDIO_PASS_THRU | 2 | |
| ALERT_MANEUVER | 3 |
CharacterSet
| Name | Value | Description |
|---|---|---|
| TYPE2SET | 0 | |
| TYPE5SET | 1 | |
| CID1SET | 2 | |
| CID2SET | 3 | |
| ASCII | 4 | ASCII as defined in https://en.wikipedia.org/wiki/ASCII(codes 0-127). Non-printable characters such as tabs and back spaces are ignored. |
| ISO_8859_1 | 5 | Latin-1, as defined in https://en.wikipedia.org/wiki/ISO/IEC_8859-1 |
| UTF_8 | 6 | The UTF-8 character set that uses variable bytes per code point. See https://en.wikipedia.org/wiki/UTF-8 for more details. This is the preferred character set. |
SamplingRate
| Name | Value | Description |
|---|---|---|
| 8KHZ | 0 | Sampling rate of 8000 Hz |
| 16KHZ | 1 | Sampling rate of 16000 Hz |
| 22KHZ | 2 | Sampling rate of 22050 Hz |
| 44KHZ | 3 | Sampling rate of 44100 Hz |
PrerecordedSpeech
| Name | Value | Description |
|---|---|---|
| HELP_JINGLE | 0 | |
| INITIAL_JINGLE | 1 | |
| LISTEN_JINGLE | 2 | |
| POSITIVE_JINGLE | 3 | |
| NEGATIVE_JINGLE | 4 |
MediaClockFormat
| Name | Value | Description |
|---|---|---|
| CLOCK1 | 0 | minutesFieldWidth = 2minutesFieldMax = 19secondsFieldWidth = 2secondsFieldMax = 99maxHours = 19maxMinutes = 59maxSeconds = 59Is used for Type II, NGN and CID head units |
| CLOCK2 | 1 | minutesFieldWidth = 3minutesFieldMax = 199secondsFieldWidth = 2secondsFieldMax = 99maxHours = 59maxMinutes = 59maxSeconds = 59Is used for Type V head units |
| CLOCK3 | 2 | minutesFieldWidth = 2minutesFieldMax = 59secondsFieldWidth = 2secondsFieldMax = 59maxHours = 9maxMinutes = 59maxSeconds = 59Is used for GEN1.1 (i.e. MFD3/4/5) head units |
| CLOCKTEXT1 | 3 | 5 characters possibleFormat: 1|sp c :|sp c c1|sp : digit "1" or spacec : character out of following character set: sp|0-9|[letters]:|sp : colon or spaceIs used for Type II head unit |
| CLOCKTEXT2 | 4 | 5 chars possibleFormat: 1|sp c :|sp c c1|sp : digit "1" or spacec : character out of following character set: sp|0-9|[letters]:|sp : colon or spaceIs used for CID and NGN head unit |
| CLOCKTEXT3 | 5 | 6 chars possibleFormat: 1|sp c c :|sp c c1|sp : digit "1" or spacec : character out of following character set: sp|0-9|[letters]:|sp : colon or spaceIs used for Type V head unit |
| CLOCKTEXT4 | 6 | 6 chars possible Format: c :|sp c c : c c:|sp : colon or spacec : character out of following character set: sp|0-9|[letters].Is used for GEN1.1 (i.e. MFD3/4/5) head units |
TouchType
| Name | Value | Description |
|---|---|---|
| BEGIN | 0 | |
| MOVE | 1 | |
| END | 2 | |
| CANCEL | 3 |
HmiZoneCapabilities
| Name | Value | Description |
|---|---|---|
| FRONT | 0 | |
| BACK | 1 |
AlertType
| Name | Value | Description |
|---|---|---|
| UI | 0 | |
| BOTH | 1 |
ECallConfirmationStatus
| Name | Value | Description |
|---|---|---|
| NORMAL | 0 | |
| CALL_IN_PROGRESS | 1 | |
| CALL_CANCELLED | 2 | |
| CALL_COMPLETED | 3 | |
| CALL_UNSUCCESSFUL | 4 | |
| ECALL_CONFIGURED_OFF | 5 | |
| CALL_COMPLETE_DTMF_TIMEOUT | 6 |
ClockUpdateMode
| Name | Value | Description |
|---|---|---|
| COUNTUP | 0 | |
| COUNTDOWN | 1 | |
| PAUSE | 2 | |
| RESUME | 3 | |
| CLEAR | 4 |
DeviceLevelStatus
| Name | Value | Description |
|---|---|---|
| ZERO_LEVEL_BARS | 0 | |
| ONE_LEVEL_BARS | 1 | |
| TWO_LEVEL_BARS | 2 | |
| THREE_LEVEL_BARS | 3 | |
| FOUR_LEVEL_BARS | 4 | |
| NOT_PROVIDED | 5 |
SystemAction
| Name | Value | Description |
|---|---|---|
| DEFAULT_ACTION | 0 | Default action occurs. Standard behavior (e.g. SoftButton clears overlay) |
| STEAL_FOCUS | 1 | The calling app's dialog or related event should clear and the app should be brought into HMI_FULL |
| KEEP_CONTEXT | 2 | Current system context is maintained. An overlay is persisted even though a SoftButton has been pressed and the notification sent |
ButtonName
| Name | Value | Description |
|---|---|---|
| OK | 0 | |
| PLAY_PAUSE | 1 | |
| SEEKLEFT | 2 | |
| SEEKRIGHT | 3 | |
| TUNEUP | 4 | |
| TUNEDOWN | 5 | |
| PRESET_0 | 6 | |
| PRESET_1 | 7 | |
| PRESET_2 | 8 | |
| PRESET_3 | 9 | |
| PRESET_4 | 10 | |
| PRESET_5 | 11 | |
| PRESET_6 | 12 | |
| PRESET_7 | 13 | |
| PRESET_8 | 14 | |
| PRESET_9 | 15 | |
| CUSTOM_BUTTON | 16 | |
| SEARCH | 17 | |
| AC_MAX | 18 | CLIMATE Module |
| AC | 19 | CLIMATE Module |
| RECIRCULATE | 20 | CLIMATE Module |
| FAN_UP | 21 | CLIMATE Module |
| FAN_DOWN | 22 | CLIMATE Module |
| TEMP_UP | 23 | CLIMATE Module |
| TEMP_DOWN | 24 | CLIMATE Module |
| DEFROST_MAX | 25 | CLIMATE Module |
| DEFROST | 26 | CLIMATE Module |
| DEFROST_REAR | 27 | CLIMATE Module |
| UPPER_VENT | 28 | CLIMATE Module |
| LOWER_VENT | 29 | CLIMATE Module |
| VOLUME_UP | 30 | RADIO Module |
| VOLUME_DOWN | 31 | RADIO Module |
| EJECT | 32 | RADIO Module |
| SOURCE | 33 | RADIO Module |
| SHUFFLE | 34 | RADIO Module |
| REPEAT | 35 | RADIO Module |
| NAV_CENTER_LOCATION | 36 | Navigation Subscription Button |
| NAV_ZOOM_IN | 37 | Navigation Subscription Button |
| NAV_ZOOM_OUT | 38 | Navigation Subscription Button |
| NAV_PAN_UP | 39 | Navigation Subscription Button |
| NAV_PAN_UP_RIGHT | 40 | Navigation Subscription Button |
| NAV_PAN_RIGHT | 41 | Navigation Subscription Button |
| NAV_PAN_DOWN_RIGHT | 42 | Navigation Subscription Button |
| NAV_PAN_DOWN | 43 | Navigation Subscription Button |
| NAV_PAN_DOWN_LEFT | 44 | Navigation Subscription Button |
| NAV_PAN_LEFT | 45 | Navigation Subscription Button |
| NAV_PAN_UP_LEFT | 46 | Navigation Subscription Button |
| NAV_TILT_TOGGLE | 47 | Navigation Subscription Button |
| NAV_ROTATE_CLOCKWISE | 48 | Navigation Subscription Button |
| NAV_ROTATE_COUNTERCLOCKWISE | 49 | Navigation Subscription Button |
| NAV_HEADING_TOGGLE | 50 | Navigation Subscription Button |
KeypressMode
| Name | Value | Description |
|---|---|---|
| SINGLE_KEYPRESS | 0 | Each keyPress is individually sent as the user presses the keyboard keys |
| QUEUE_KEYPRESSES | 1 | The keyPresses are queued and a string is eventually sent once the user chooses to submit their entry |
| RESEND_CURRENT_ENTRY | 2 | The keyPresses are queue and a string is sent each time the user presses a keyboard key; the string contains the entire current entry |
WiperStatus
| Name | Value | Description |
|---|---|---|
| OFF | 0 | The wipers are off |
| AUTO_OFF | 1 | The wipers are automatically off |
| OFF_MOVING | 2 | Means that though set to off, somehow the wipers have been engaged (physically moved enough to engage a wiping motion) |
| MAN_INT_OFF | 3 | The wipers are manually off after having been working |
| MAN_INT_ON | 4 | The wipers are manually on |
| MAN_LOW | 5 | The wipers are manually set to low speed |
| MAN_HIGH | 6 | The wipers are manually set to high speed |
| MAN_FLICK | 7 | The wipers are manually set for doing a flick |
| WASH | 8 | The wipers are set to use the water from vehicle washer bottle for cleaning the windscreen |
| AUTO_LOW | 9 | The wipers are automatically set to low speed |
| AUTO_HIGH | 10 | The wipers are automatically set to high speed |
| COURTESYWIPE | 11 | This is for when a user has just initiated a WASH and several seconds later a secondary wipe is automatically initiated to clear remaining fluid |
| AUTO_ADJUST | 12 | This is set as the user moves between possible automatic wiper speeds |
| STALLED | 13 | The wiper is stalled to its place |
| NO_DATA_EXISTS | 14 | The sensor / module cannot provide any information for wiper |
LayoutMode
| Name | Value | Description |
|---|---|---|
| ICON_ONLY | 0 | |
| ICON_WITH_SEARCH | 1 | |
| LIST_ONLY | 2 | |
| LIST_WITH_SEARCH | 3 | |
| KEYBOARD | 4 |
Language
| Name | Value | Description |
|---|---|---|
| EN-US | 0 | English - US |
| ES-MX | 1 | Spanish - Mexico |
| FR-CA | 2 | French - Canada |
| DE-DE | 3 | German - Germany |
| ES-ES | 4 | Spanish - Spain |
| EN-GB | 5 | English - GB |
| RU-RU | 6 | Russian - Russia |
| TR-TR | 7 | Turkish - Turkey |
| PL-PL | 8 | Polish - Poland |
| FR-FR | 9 | French - France |
| IT-IT | 10 | Italian - Italy |
| SV-SE | 11 | Swedish - Sweden |
| PT-PT | 12 | Portuguese - Portugal |
| NL-NL | 13 | Dutch (Standard) - Netherlands |
| EN-AU | 14 | English - Australia |
| ZH-CN | 15 | Mandarin - China |
| ZH-TW | 16 | Mandarin - Taiwan |
| JA-JP | 17 | Japanese - Japan |
| AR-SA | 18 | Arabic - Saudi Arabia |
| KO-KR | 19 | Korean - South Korea |
| PT-BR | 20 | Portuguese - Brazil |
| CS-CZ | 21 | Czech - Czech Republic |
| DA-DK | 22 | Danish - Denmark |
| NO-NO | 23 | Norwegian - Norway |
| NL-BE | 24 | Dutch (Flemish) - Belgium |
| EL-GR | 25 | Greek - Greece |
| HU-HU | 26 | Hungarian - Hungary |
| FI-FI | 27 | Finnish - Finland |
| SK-SK | 28 | Slovak - Slovakia |
| EN-IN | 29 | English - India |
| TH-TH | 30 | Thai - Thailand |
| EN-SA | 31 | English - Middle East |
| HE-IL | 32 | Hebrew - Israel |
| RO-RO | 33 | Romanian - Romania |
| UK-UA | 34 | Ukrainian - Ukraine |
| ID-ID | 35 | Indonesian - Indonesia |
| VI-VN | 36 | Vietnamese - Vietnam |
| MS-MY | 37 | Malay - Malaysia |
| HI-IN | 38 | Hindi - India |
FileType
| Name | Value | Description |
|---|---|---|
| GRAPHIC_BMP | 0 | |
| GRAPHIC_JPEG | 1 | |
| GRAPHIC_PNG | 2 | |
| AUDIO_WAVE | 3 | |
| AUDIO_MP3 | 4 | |
| AUDIO_AAC | 5 | |
| BINARY | 6 | |
| JSON | 7 |
AudioType
| Name | Value | Description |
|---|---|---|
| PCM | 0 | Linear PCM |
TBTState
| Name | Value | Description |
|---|---|---|
| ROUTE_UPDATE_REQUEST | 0 | |
| ROUTE_ACCEPTED | 1 | |
| ROUTE_REFUSED | 2 | |
| ROUTE_CANCELLED | 3 | |
| ETA_REQUEST | 4 | |
| NEXT_TURN_REQUEST | 5 | |
| ROUTE_STATUS_REQUEST | 6 | |
| ROUTE_SUMMARY_REQUEST | 7 | |
| TRIP_STATUS_REQUEST | 8 | |
| ROUTE_UPDATE_REQUEST_TIMEOUT | 9 |
VehicleDataResultCode
| Name | Value | Description |
|---|---|---|
| SUCCESS | 0 | |
| TRUNCATED_DATA | 1 | |
| DISALLOWED | 2 | |
| USER_DISALLOWED | 3 | |
| INVALID_ID | 4 | |
| VEHICLE_DATA_NOT_AVAILABLE | 5 | |
| DATA_ALREADY_SUBSCRIBED | 6 | |
| DATA_NOT_SUBSCRIBED | 7 | |
| IGNORED | 8 |
DisplayType
| Name | Value | Description |
|---|---|---|
| CID | 0 | A 2-line x 20 character "dot matrix" display |
| TYPE2 | 1 | 1 line older radio head unit |
| TYPE5 | 2 | Old radio head unit |
| NGN | 3 | Next Generation Navigation display |
| GEN2_8_DMA | 4 | GEN-2, 8 inch display |
| GEN2_6_DMA | 5 | GEN-2, 6 inch display |
| MFD3 | 6 | 3 inch GEN1.1 display |
| MFD4 | 7 | 4 inch GEN1.1 display |
| MFD5 | 8 | 5 inch GEN1.1 display |
| GEN3_8_INCH | 9 | |
| SDL_GENERIC | 10 |
ApplicationExitReason
| Name | Value | Description |
|---|---|---|
| DRIVER_DISTRACTION_VIOLATION | 0 | By getting this value, SDL puts the named app to NONE HMILevel |
| USER_EXIT | 1 | By getting this value, SDL puts the named app to NONE HMILevel |
| UNAUTHORIZED_TRANSPORT_REGISTRATION | 2 | By getting this value, SDL unregisters the named application |
| UNSUPPORTED_HMI_RESOURCE | 3 | By getting this value, SDL unregisters the named application |
| CLOSE_CLOUD_CONNECTION | 4 | By getting this value, SDL puts the named app to NONE HMILevel. Used by the HMI to close a cloud app connection |
| RESOURCE_CONSTRAINT | 5 | By getting this value, SDL should unregister the application to allow the HMI to close the application. |
IgnitionStatus
| Name | Value | Description |
|---|---|---|
| UNKNOWN | 0 | The information is not acceptable |
| OFF | 1 | The ignition is off |
| ACCESSORY | 2 | The accessories are active (power windows, audio, display, etc.) |
| RUN | 3 | Ignition is active |
| START | 4 | Starter is switched |
| INVALID | 5 | The data is provided, but there is some sort of fault or problem |
EmergencyEventType
| Name | Value | Description |
|---|---|---|
| NO_EVENT | 0 | |
| FRONTAL | 1 | |
| SIDE | 2 | |
| REAR | 3 | |
| ROLLOVER | 4 | |
| NOT_SUPPORTED | 5 | |
| FAULT | 6 |
HMILevel
| Name | Value | Description |
|---|---|---|
| FULL | 0 | |
| LIMITED | 1 | |
| BACKGROUND | 2 | |
| NONE | 3 |
AppPriority
| Name | Value | Description |
|---|---|---|
| EMERGENCY | 0 | |
| NAVIGATION | 1 | |
| VOICE_COMMUNICATION | 2 | |
| COMMUNICATION | 3 | |
| NORMAL | 4 | |
| NONE | 5 |
PowerModeQualificationStatus
| Name | Value | Description |
|---|---|---|
| POWER_MODE_UNDEFINED | 0 | |
| POWER_MODE_EVALUATION_IN_PROGRESS | 1 | |
| NOT_DEFINED | 2 | |
| POWER_MODE_OK | 3 |
ApplicationsCloseReason
| Name | Value | Description |
|---|---|---|
| IGNITION_OFF | 0 | |
| MASTER_RESET | 1 | |
| FACTORY_DEFAULTS | 2 | |
| SUSPEND | 3 |
Dimension
| Name | Value | Description |
|---|---|---|
| NO_FIX | 0 | No GPS at all |
| 2D | 1 | Longitude and latitude |
| 3D | 2 | Longitude and latitude and altitude |
ImageType
| Name | Value | Description |
|---|---|---|
| STATIC | 0 | |
| DYNAMIC | 1 |
AudioStreamingIndicator
| Name | Value | Description |
|---|---|---|
| PLAY_PAUSE | 0 | Default playback indicator. |
| PLAY | 1 | Indicates that a button press of the Play/Pause button would start the playback. |
| PAUSE | 2 | Indicates that a button press of the Play/Pause button would pause the current playback. |
| STOP | 3 | Indicates that a button press of the Play/Pause button would stop the current playback. |
IgnitionStableStatus
| Name | Value | Description |
|---|---|---|
| IGNITION_SWITCH_NOT_STABLE | 0 | |
| IGNITION_SWITCH_STABLE | 1 | |
| MISSING_FROM_TRANSMITTER | 2 | Either the data is not accessible or the sensor is broken |
WarningLightStatus
| Name | Value | Description |
|---|---|---|
| OFF | 0 | |
| ON | 1 | |
| FLASH | 2 | |
| NOT_USED | 3 |
VehicleDataNotificationStatus
| Name | Value | Description |
|---|---|---|
| NOT_SUPPORTED | 0 | |
| NORMAL | 1 | |
| ACTIVE | 2 | |
| NOT_USED | 3 |
SystemError
| Name | Value | Description |
|---|---|---|
| SYNC_REBOOTED | 0 | |
| SYNC_OUT_OF_MEMMORY | 1 |
PowerModeStatus
| Name | Value | Description |
|---|---|---|
| KEY_OUT | 0 | |
| KEY_RECENTLY_OUT | 1 | |
| KEY_APPROVED_0 | 2 | |
| POST_ACCESORY_0 | 3 | |
| ACCESORY_1 | 4 | |
| POST_IGNITION_1 | 5 | |
| IGNITION_ON_2 | 6 | |
| RUNNING_2 | 7 | |
| CRANK_3 | 8 |
ComponentVolumeStatus
| Name | Value | Description |
|---|---|---|
| UNKNOWN | 0 | The data is unknown |
| NORMAL | 1 | The volume is normal |
| LOW | 2 | The volume is low |
| FAULT | 3 | The module/sensor is currently faulted |
| ALERT | 4 | The component`s volume is in critical level |
| NOT_SUPPORTED | 5 | The data is not supported |
PrimaryAudioSource
| Name | Value | Description |
|---|---|---|
| NO_SOURCE_SELECTED | 0 | |
| CD | 1 | |
| USB | 2 | |
| USB2 | 3 | |
| BLUETOOTH_STEREO_BTST | 4 | |
| LINE_IN | 5 | |
| IPOD | 6 | |
| MOBILE_APP | 7 | |
| AM | 8 | |
| FM | 9 | |
| XM | 10 | |
| DAB | 11 |
RequestType
| Name | Value | Description |
|---|---|---|
| HTTP | 0 | |
| FILE_RESUME | 1 | |
| AUTH_REQUEST | 2 | |
| AUTH_CHALLENGE | 3 | |
| AUTH_ACK | 4 | |
| PROPRIETARY | 5 | |
| QUERY_APPS | 6 | |
| LAUNCH_APP | 7 | |
| LOCK_SCREEN_ICON_URL | 8 | |
| TRAFFIC_MESSAGE_CHANNEL | 9 | |
| DRIVER_PROFILE | 10 | |
| VOICE_SEARCH | 11 | |
| NAVIGATION | 12 | |
| PHONE | 13 | |
| CLIMATE | 14 | |
| SETTINGS | 15 | |
| VEHICLE_DIAGNOSTICS | 16 | |
| EMERGENCY | 17 | |
| MEDIA | 18 | |
| FOTA | 19 | |
| OEM_SPECIFIC | 20 | |
| ICON_URL | 21 |
ConsentSource
| Name | Value | Description |
|---|---|---|
| GUI | 0 | |
| VUI | 1 |
CompassDirection
| Name | Value | Description |
|---|---|---|
| NORTH | 0 | |
| NORTHWEST | 1 | |
| WEST | 2 | |
| SOUTHWEST | 3 | |
| SOUTH | 4 | |
| SOUTHEAST | 5 | |
| EAST | 6 | |
| NORTHEAST | 7 |
BitsPerSample
| Name | Value | Description |
|---|---|---|
| 8_BIT | 0 | Audio sample is 8 bits wide, unsigned |
| 16_BIT | 1 | Audio sample is 16 bits wide, signed, and in little endian |
EmergencyState
| Name | Value | Description |
|---|---|---|
| EMERGENCY_ON | 0 | |
| EMERGENCY_OFF | 1 |
Result
| Name | Value | Description |
|---|---|---|
| SUCCESS | 0 | |
| UNSUPPORTED_REQUEST | 1 | |
| UNSUPPORTED_RESOURCE | 2 | If this response is returned to core and the related HMI interface state is not available, core will return success:false to mobile. Otherwise core will return success:true |
| DISALLOWED | 3 | |
| REJECTED | 4 | |
| ABORTED | 5 | |
| IGNORED | 6 | |
| RETRY | 7 | |
| IN_USE | 8 | |
| DATA_NOT_AVAILABLE | 9 | |
| TIMED_OUT | 10 | |
| INVALID_DATA | 11 | |
| CHAR_LIMIT_EXCEEDED | 12 | |
| INVALID_ID | 13 | |
| DUPLICATE_NAME | 14 | |
| APPLICATION_NOT_REGISTERED | 15 | |
| WRONG_LANGUAGE | 16 | |
| OUT_OF_MEMORY | 17 | |
| TOO_MANY_PENDING_REQUESTS | 18 | |
| NO_APPS_REGISTERED | 19 | |
| NO_DEVICES_CONNECTED | 20 | |
| WARNINGS | 21 | |
| GENERIC_ERROR | 22 | |
| USER_DISALLOWED | 23 | |
| TRUNCATED_DATA | 24 | |
| SAVED | 25 | |
| READ_ONLY | 26 |
CarModeStatus
| Name | Value | Description |
|---|---|---|
| NORMAL | 0 | |
| FACTORY | 1 | |
| TRANSPORT | 2 | |
| CRASH | 3 |
ImageFieldName
| Name | Value | Description |
|---|---|---|
| softButtonImage | 0 | The image field for SoftButton |
| choiceImage | 1 | The first image field for Choice |
| choiceSecondaryImage | 2 | The secondary image field for Choice |
| vrHelpItem | 3 | The image field for vrHelpItem |
| turnIcon | 4 | The image field for Turn |
| menuIcon | 5 | The image field for the menu icon in SetGlobalProperties |
| cmdIcon | 6 | The image field for AddCommand |
| appIcon | 7 | The image field for the app icon (set by setAppIcon) |
| graphic | 8 | The primary image field for Show |
| secondaryGraphic | 9 | The secondary image field for Show |
| showConstantTBTIcon | 10 | The primary image field for ShowConstantTBT |
| showConstantTBTNextTurnIcon | 11 | The secondary image field for ShowConstantTBT |
| locationImage | 12 | The optional image of a destination / location |
| alertIcon | 13 | The image field for Alert |
| subMenuIcon | 14 | The image field for AddSubMenu.menuIcon |
| subtleAlertIcon | 15 | The image of the subtle alert; applies to SubtleAlert alertIcon |
| menuCommandSecondaryImage | 16 | The secondary image field for AddCommand |
| menuSubMenuSecondaryImage | 17 | The secondary image field for AddSubMenu |
VehicleDataType
| Name | Value | Description |
|---|---|---|
| VEHICLEDATA_GPS | 0 | Notifies GPSData may be subscribed |
| VEHICLEDATA_SPEED | 1 | |
| VEHICLEDATA_RPM | 2 | |
| VEHICLEDATA_FUELLEVEL | 3 | |
| VEHICLEDATA_FUELLEVEL_STATE | 4 | |
| VEHICLEDATA_FUELCONSUMPTION | 5 | |
| VEHICLEDATA_EXTERNTEMP | 6 | |
| VEHICLEDATA_VIN | 7 | |
| VEHICLEDATA_GEARSTATUS | 8 | |
| VEHICLEDATA_PRNDL | 9 | |
| VEHICLEDATA_TIREPRESSURE | 10 | |
| VEHICLEDATA_ODOMETER | 11 | |
| VEHICLEDATA_BELTSTATUS | 12 | |
| VEHICLEDATA_BODYINFO | 13 | |
| VEHICLEDATA_DEVICESTATUS | 14 | |
| VEHICLEDATA_ECALLINFO | 15 | |
| VEHICLEDATA_AIRBAGSTATUS | 16 | |
| VEHICLEDATA_EMERGENCYEVENT | 17 | |
| VEHICLEDATA_CLUSTERMODESTATUS | 18 | |
| VEHICLEDATA_MYKEY | 19 | |
| VEHICLEDATA_BRAKING | 20 | |
| VEHICLEDATA_WIPERSTATUS | 21 | |
| VEHICLEDATA_HEADLAMPSTATUS | 22 | |
| VEHICLEDATA_BATTVOLTAGE | 23 | |
| VEHICLEDATA_ENGINETORQUE | 24 | |
| VEHICLEDATA_ACCPEDAL | 25 | |
| VEHICLEDATA_STEERINGWHEEL | 26 | |
| VEHICLEDATA_TURNSIGNAL | 27 | |
| VEHICLEDATA_FUELRANGE | 28 | |
| VEHICLEDATA_ENGINEOILLIFE | 29 | |
| VEHICLEDATA_ELECTRONICPARKBRAKESTATUS | 30 | |
| VEHICLEDATA_CLOUDAPPVEHICLEID | 31 | Parameter used by cloud apps or the policy server to identify a head unit |
| VEHICLEDATA_OEM_CUSTOM_DATA | 32 | |
| VEHICLEDATA_STABILITYCONTROLSSTATUS | 33 | |
| VEHICLEDATA_WINDOWSTATUS | 34 | |
| VEHICLEDATA_HANDSOFFSTEERING | 35 | |
| VEHICLEDATA_SEATOCCUPANCY | 36 | |
| VEHICLEDATA_CLIMATEDATA | 37 |
VideoStreamingProtocol
| Name | Value | Description |
|---|---|---|
| RAW | 0 | Raw stream bytes |
| RTP | 1 | Real-time Transport Protocol |
| RTSP | 2 | Real-time Streaming Protocol |
| RTMP | 3 | Real-Time Messaging Protocol |
| WEBM | 4 | WebM container |
VideoStreamingCodec
| Name | Value | Description |
|---|---|---|
| H264 | 0 | MPEG-4 Advanced Video Coding |
| H265 | 1 | High Efficiency Video Coding |
| Theora | 2 | Ogg Theora |
| VP8 | 3 | VP8 can be multiplexed into the Matroska-based container format WebM along with Vorbis and Opus audio. The image format WebP is based on VP8's intra-frame coding |
| VP9 | 4 | Similar to VP8, but VP9 is customized for video resolutions beyond high-definition video (UHD) and also enables lossless compression |
UpdateResult
| Name | Value | Description |
|---|---|---|
| UP_TO_DATE | 0 | |
| UPDATING | 1 | |
| UPDATE_NEEDED | 2 |
PRNDL
| Name | Value | Description |
|---|---|---|
| PARK | 0 | Parking |
| REVERSE | 1 | Reverse gear |
| NEUTRAL | 2 | No gear |
| DRIVE | 3 | Regular Drive mode |
| SPORT | 4 | Drive Sport mode |
| LOWGEAR | 5 | 1st gear hold |
| FIRST | 6 | |
| SECOND | 7 | |
| THIRD | 8 | |
| FOURTH | 9 | |
| FIFTH | 10 | |
| SIXTH | 11 | |
| SEVENTH | 12 | |
| EIGHTH | 13 | |
| NINTH | 14 | |
| TENTH | 15 | |
| UNKNOWN | 16 | |
| FAULT | 17 |
TPMS
| Name | Value | Description |
|---|---|---|
| UNKNOWN | 0 | If set the status of the tire is not known. |
| SYSTEM_FAULT | 1 | TPMS does not function. |
| SENSOR_FAULT | 2 | The sensor of the tire does not function. |
| LOW | 3 | TPMS is reporting a low tire pressure for the tire. |
| SYSTEM_ACTIVE | 4 | TPMS is active and the tire pressure is monitored. |
| TRAIN | 5 | TPMS is reporting that the tire must be trained. |
| TRAINING_COMPLETE | 6 | TPMS reports the training for the tire is completed. |
| NOT_TRAINED | 7 | TPMS reports the tire is not trained. |
VehicleDataStatus
| Name | Value | Description |
|---|---|---|
| NO_DATA_EXISTS | 0 | |
| OFF | 1 | |
| ON | 2 |
ModuleType
| Name | Value | Description |
|---|---|---|
| CLIMATE | 0 | |
| RADIO | 1 | |
| SEAT | 2 | |
| AUDIO | 3 | |
| LIGHT | 4 | |
| HMI_SETTINGS | 5 |
RadioBand
| Name | Value | Description |
|---|---|---|
| AM | 0 | |
| FM | 1 | |
| XM | 2 |
RadioState
| Name | Value | Description |
|---|---|---|
| ACQUIRING | 0 | |
| ACQUIRED | 1 | |
| MULTICAST | 2 | |
| NOT_FOUND | 3 |
TemperatureUnit
| Name | Value | Description |
|---|---|---|
| FAHRENHEIT | 0 | |
| CELSIUS | 1 |
DefrostZone
| Name | Value | Description |
|---|---|---|
| FRONT | 0 | |
| REAR | 1 | |
| ALL | 2 | |
| NONE | 3 |
VentilationMode
| Name | Value | Description |
|---|---|---|
| UPPER | 0 | |
| LOWER | 1 | |
| BOTH | 2 | |
| NONE | 3 |
RCAccessMode
| Name | Value | Description |
|---|---|---|
| AUTO_ALLOW | 0 | Any RC app can take immediately gain control a module when it is requested |
| AUTO_DENY | 1 | An RC app has control of a module until the app releases it, all requests for control of the module by other apps are rejected |
| ASK_DRIVER | 2 | The driver is prompted when an app requests control of a module that is currently being used |
EntityStatus
| Name | Value | Description |
|---|---|---|
| ON | 0 | |
| OFF | 1 |
FuelType
| Name | Value | Description |
|---|---|---|
| GASOLINE | 0 | |
| DIESEL | 1 | |
| CNG | 2 | For vehicles using compressed natural gas |
| LPG | 3 | For vehicles using liquefied petroleum gas |
| HYDROGEN | 4 | For FCEV (fuel cell electric vehicle) |
| BATTERY | 5 | For BEV (Battery Electric Vehicle), PHEV (Plug-in Hybrid Electric Vehicle), solar vehicles and other vehicles which run on a battery |
TurnSignal
| Name | Value | Description |
|---|---|---|
| OFF | 0 | Turn signal is OFF |
| LEFT | 1 | Left turn signal is on |
| RIGHT | 2 | Right turn signal is on |
| BOTH | 3 | Both signals (left and right) are on |
ElectronicParkBrakeStatus
| Name | Value | Description |
|---|---|---|
| CLOSED | 0 | Park brake actuators have been fully applied. |
| TRANSITION | 1 | Park brake actuators are transitioning to either Apply/Closed or Release/Open state. |
| OPEN | 2 | Park brake actuators are released. |
| DRIVE_ACTIVE | 3 | When driver pulls the Electronic Park Brake switch while driving "at speed". |
| FAULT | 4 | When system has a fault or is under maintenance. |
LightName
| Name | Value | Description |
|---|---|---|
| FRONT_LEFT_HIGH_BEAM | 0 | |
| FRONT_RIGHT_HIGH_BEAM | 1 | |
| FRONT_LEFT_LOW_BEAM | 2 | |
| FRONT_RIGHT_LOW_BEAM | 3 | |
| FRONT_LEFT_PARKING_LIGHT | 4 | |
| FRONT_RIGHT_PARKING_LIGHT | 5 | |
| FRONT_LEFT_FOG_LIGHT | 6 | |
| FRONT_RIGHT_FOG_LIGHT | 7 | |
| FRONT_LEFT_DAYTIME_RUNNING_LIGHT | 8 | |
| FRONT_RIGHT_DAYTIME_RUNNING_LIGHT | 9 | |
| FRONT_LEFT_TURN_LIGHT | 10 | |
| FRONT_RIGHT_TURN_LIGHT | 11 | |
| REAR_LEFT_FOG_LIGHT | 12 | |
| REAR_RIGHT_FOG_LIGHT | 13 | |
| REAR_LEFT_TAIL_LIGHT | 14 | |
| REAR_RIGHT_TAIL_LIGHT | 15 | |
| REAR_LEFT_BRAKE_LIGHT | 16 | |
| REAR_RIGHT_BRAKE_LIGHT | 17 | |
| REAR_LEFT_TURN_LIGHT | 18 | |
| REAR_RIGHT_TURN_LIGHT | 19 | |
| REAR_REGISTRATION_PLATE_LIGHT | 20 | |
| HIGH_BEAMS | 501 | Include all high beam lights: front_left and front_right |
| LOW_BEAMS | 502 | Include all low beam lights: front_left and front_right |
| FOG_LIGHTS | 503 | Include all fog lights: front_left, front_right, rear_left and rear_right |
| RUNNING_LIGHTS | 504 | Include all daytime running lights: front, left and right |
| PARKING_LIGHTS | 505 | Include all parking lights: front_left and front_right |
| BRAKE_LIGHTS | 506 | Include all brake lights: rear_left and rear_right |
| REAR_REVERSING_LIGHTS | 507 | |
| SIDE_MARKER_LIGHTS | 508 | |
| LEFT_TURN_LIGHTS | 509 | Include all left turn signal lights: front_left, rear_left, left_side and mirror_mounted |
| RIGHT_TURN_LIGHTS | 510 | Include all right turn signal lights: front_right, rear_right, right_side and mirror_mounted |
| HAZARD_LIGHTS | 511 | Include all hazard lights: front_left, front_right, rear_left and rear_right |
| REAR_CARGO_LIGHTS | 512 | Cargo lamps illuminate the cargo area. |
| REAR_TRUCK_BED_LIGHTS | 513 | Truck bed lamps light up the bed of the truck. |
| REAR_TRAILER_LIGHTS | 514 | Trailer lights are lamps mounted on a trailer hitch. |
| LEFT_SPOT_LIGHTS | 515 | It is the spotlights mounted on the left side of a vehicle. |
| RIGHT_SPOT_LIGHTS | 516 | It is the spotlights mounted on the right side of a vehicle. |
| LEFT_PUDDLE_LIGHTS | 517 | Puddle lamps illuminate the ground beside the door as the customer is opening or approaching the door. |
| RIGHT_PUDDLE_LIGHTS | 518 | Puddle lamps illuminate the ground beside the door as the customer is opening or approaching the door. |
| AMBIENT_LIGHTS | 801 | |
| OVERHEAD_LIGHTS | 802 | |
| READING_LIGHTS | 803 | |
| TRUNK_LIGHTS | 804 | |
| EXTERIOR_FRONT_LIGHTS | 901 | Include exterior lights located in front of the vehicle. For example, fog lights and low beams |
| EXTERIOR_REAR_LIGHTS | 902 | Include exterior lights located at the back of the vehicle. For example, license plate lights, reverse lights, cargo lights, bed lights an trailer assist lights |
| EXTERIOR_LEFT_LIGHTS | 903 | Include exterior lights located at the left side of the vehicle. For example, left puddle lights and spot lights |
| EXTERIOR_RIGHT_LIGHTS | 904 | Include exterior lights located at the right side of the vehicle. For example, right puddle lights and spot lights |
| EXTERIOR_ALL_LIGHTS | 905 | Include all exterior lights around the vehicle |
LightStatus
| Name | Value | Description |
|---|---|---|
| ON | 0 | |
| OFF | 1 | |
| RAMP_UP | 2 | |
| RAMP_DOWN | 3 | |
| UNKNOWN | 4 | |
| INVALID | 5 |
DisplayMode
| Name | Value | Description |
|---|---|---|
| DAY | 0 | |
| NIGHT | 1 | |
| AUTO | 2 |
DistanceUnit
| Name | Value | Description |
|---|---|---|
| MILES | 0 | |
| KILOMETERS | 1 |
MassageZone
| Name | Value | Description |
|---|---|---|
| LUMBAR | 0 | The back of a multi-contour massage seat. or SEAT_BACK |
| SEAT_CUSHION | 1 | The bottom a multi-contour massage seat. or SEAT_BOTTOM |
MassageMode
| Name | Value | Description |
|---|---|---|
| OFF | 0 | |
| LOW | 1 | |
| HIGH | 2 |
MassageCushion
| Name | Value | Description |
|---|---|---|
| TOP_LUMBAR | 0 | |
| MIDDLE_LUMBAR | 1 | |
| BOTTOM_LUMBAR | 2 | |
| BACK_BOLSTERS | 3 | |
| SEAT_BOLSTERS | 4 |
SeatMemoryActionType
| Name | Value | Description |
|---|---|---|
| SAVE | 0 | Save current seat positions and settings to seat memory. |
| RESTORE | 1 | Restore / apply the seat memory settings to the current seat. |
| NONE | 2 | No action to be performed. |
SupportedSeat
| Name | Value | Description |
|---|---|---|
| DRIVER | 0 | |
| FRONT_PASSENGER | 1 |
DeliveryMode
| Name | Value | Description |
|---|---|---|
| PROMPT | 0 | |
| DESTINATION | 1 | |
| QUEUE | 2 |
AppServiceType
| Name | Value | Description |
|---|---|---|
| MEDIA | 0 | |
| WEATHER | 1 | |
| NAVIGATION | 2 |
ServiceUpdateReason
| Name | Value | Description |
|---|---|---|
| PUBLISHED | 0 | The service has just been published with the module and once activated to the primary service of its type, it will be ready for possible consumption |
| REMOVED | 1 | The service has just been unpublished with the module and is no longer accessible |
| ACTIVATED | 2 | The service is activated as the primary service of this type. All requests dealing with this service type will be handled by this service |
| DEACTIVATED | 3 | The service has been deactivated as the primary service of its type |
| MANIFEST_UPDATE | 4 | The service has updated its manifest. This could imply updated capabilities. Note: Currently unimplemented |
SystemCapabilityType
| Name | Value | Description |
|---|---|---|
| NAVIGATION | 0 | |
| PHONE_CALL | 1 | |
| VIDEO_STREAMING | 2 | |
| REMOTE_CONTROL | 3 | |
| APP_SERVICES | 4 | |
| DISPLAYS | 5 | |
| SEAT_LOCATION | 6 | |
| DRIVER_DISTRACTION | 7 | Describes capabilities when the driver is distracted |
MediaType
| Name | Value | Description |
|---|---|---|
| MUSIC | 0 | |
| PODCAST | 1 | |
| AUDIOBOOK | 2 | |
| OTHER | 3 |
NavigationAction
| Name | Value | Description |
|---|---|---|
| TURN | 0 | Using this action plus a supplied direction can give the type of turn |
| EXIT | 1 | |
| STAY | 2 | |
| MERGE | 3 | |
| FERRY | 4 | |
| CAR_SHUTTLE_TRAIN | 5 | |
| WAYPOINT | 6 |
NavigationJunction
| Name | Value | Description |
|---|---|---|
| REGULAR | 0 | A junction that represents a standard intersection with a single road crossing another |
| BIFURCATION | 1 | A junction where the road splits off into two paths; a fork in the road |
| MULTI_CARRIAGEWAY | 2 | A junction that has multiple intersections and paths |
| ROUNDABOUT | 3 | A junction where traffic moves in a single direction around a central, non-traversable point to reach one of the connecting roads |
| TRAVERSABLE_ROUNDABOUT | 4 | Similar to a roundabout, however the center of the roundabout is fully traversable. Also known as a mini-roundabout |
| JUGHANDLE | 5 | A junction where lefts diverge to the right, then curve to the left, converting a left turn to a crossing maneuver |
| ALL_WAY_YIELD | 6 | Multiple way intersection that allows traffic to flow based on priority; most commonly right of way and first in, first out |
| TURN_AROUND | 7 | A junction designated for traffic turnarounds |
Direction
| Name | Value | Description |
|---|---|---|
| LEFT | 0 | |
| RIGHT | 1 |
WindowType
| Name | Value | Description |
|---|---|---|
| MAIN | 0 | This window type describes the main window on a display |
| WIDGET | 1 | A widget is a small window that the app can create to provide information and soft buttons for quick app control |
PredefinedWindows
| Name | Value | Description |
|---|---|---|
| DEFAULT_WINDOW | 0 | The default window is a main window pre-created on behalf of the app |
| PRIMARY_WIDGET | 1 | The primary widget of the app |
ServiceType
| Name | Value | Description |
|---|---|---|
| VIDEO | 0 | Refers to the Video service. |
| AUDIO | 1 | Refers to the Audio service. |
| RPC | 2 | Refers to RPC service. |
ServiceEvent
| Name | Value | Description |
|---|---|---|
| REQUEST_RECEIVED | 0 | When a request for a Service is received. |
| REQUEST_ACCEPTED | 1 | When a request for a Service is accepted. |
| REQUEST_REJECTED | 2 | When a request for a Service is rejected. |
ServiceStatusUpdateReason
| Name | Value | Description |
|---|---|---|
| PTU_FAILED | 0 | When a Service is rejected because the system was unable to get a required Policy Table Update. |
| INVALID_CERT | 1 | When a Service is rejected because the security certificate is invalid/expired. |
| INVALID_TIME | 2 | When a Service is rejected because the system was unable to get a valid SystemTime from HMI, which is required for certificate authentication. |
| PROTECTION_ENFORCED | 3 | When a Service is rejected because the system configuration ini file requires the service must be protected, but the app asks for an unprotected service. |
| PROTECTION_DISABLED | 4 | When a mobile app requests a protected service, but the system starts an unprotected service instead. |
HybridAppPreference
| Name | Value | Description |
|---|---|---|
| MOBILE | 0 | |
| CLOUD | 1 | |
| BOTH | 2 |
TransmissionType
| Name | Value | Description |
|---|---|---|
| MANUAL | 0 | Manual transmission. |
| AUTOMATIC | 1 | Automatic transmission. |
| SEMI_AUTOMATIC | 2 | Semi automatic transmission. |
| DUAL_CLUTCH | 3 | Dual clutch transmission. |
| CONTINUOUSLY_VARIABLE | 4 | Continuously variable transmission(CVT). |
| INFINITELY_VARIABLE | 5 | Infinitely variable transmission. |
| ELECTRIC_VARIABLE | 6 | Electric variable transmission. |
| DIRECT_DRIVE | 7 | Direct drive between engine and wheels. |
CapacityUnit
| Name | Value | Description |
|---|---|---|
| LITERS | 0 | |
| KILOWATTHOURS | 1 | |
| KILOGRAMS | 2 |
SeekIndicatorType
| Name | Value | Description |
|---|---|---|
| TRACK | 0 | |
| TIME | 1 |
DoorStatusType
| Name | Value | Description |
|---|---|---|
| CLOSED | 0 | The status is selected if a door is closed and unlocked or if a door is closed and unknown locked state |
| LOCKED | 1 | The status is selected if a door is closed and locked |
| AJAR | 2 | The status is selected if a door is open |
| REMOVED | 3 | The status is selected if a door is physically removed |
KeyboardInputMask
| Name | Value | Description |
|---|---|---|
| ENABLE_INPUT_KEY_MASK | 0 | |
| DISABLE_INPUT_KEY_MASK | 1 | |
| USER_CHOICE_INPUT_KEY_MASK | 2 |
AppCapabilityType
| Name | Value | Description |
|---|---|---|
| VIDEO_STREAMING | 0 |