SendLocation

Type

Function

Sender

SDL

Purpose

Allow a connected application to send a destination to the embedded navigation system.

Behavior

!!! must
1. Transfer data received from SDL to navigation embedded module. Navigation embedded HU system should update the location data on the embedded navi screen.
2. Send a SUCCESS response to SDL in case the destination data has been obtained.
3. Ignore<deliveryMode>, <timeStampParams>,<address> parameters in case HMI does not support them (note: app will not know whether the whole information was processed by HMI)
4. Respond with WARNINGS and “info: were not processed”” to SDL in case HMI partially supports <deliveryMode>, <timeStampParams>,<address>(SDL will transfer it to mobile app)
5. Respond with REJECTED result code to SDL in case HMI is currently busy with a higher-priority event or other reasons defined for the mentioned resultCode by HMI.

Request

Parameters

Response

Parameters

This RPC has no additional parameter requirements

Sequence Diagrams

JSON Message Examples

Example Request

{
  "id" : 138,
  "jsonrpc" : "2.0",
  "method" : "Navigation.SendLocation",
  "params" :
  {
    "longitudeDegrees" : 139.34,
    "latitudeDegrees" : 35.36,
    "locationName" : "Ford Repair",
    "locationImage" :
    {
         "value" : "tmp/SDL/app/Navi/12345.jpg",
         "imageType" : "DYNAMIC"
    },
    "appID" : 65368
  }
}

Example Response

{
  "id" : 138,
  "jsonrpc" : "2.0",
  "result" :
  {
    "code" : 0,
    "method" : "Navigation.SendLocation"
  }
}

Example Error

{
  "id" : 138,
  "jsonrpc" : "2.0",
  "error" :
  {
    "code" : 22,
    "message" : " The unknown issue occurred ",
    "data" :
    {
      "method" : "Navigation.SendLocation"
    }
  }
}