Enumerations

KeyboardEvent

Name	Value	Description
KEYPRESS	0
ENTRY_SUBMITTED	1
ENTRY_VOICE	2
ENTRY_CANCELLED	3
ENTRY_ABORTED	4

FuelCutoffStatus

Name	Value	Description
TERMINATE_FUEL	0
NORMAL_OPERATION	1
FAULT	2

TransportType

Name	Value	Description
BLUETOOTH	0
USB_IOS	1
USB_AOA	2
WIFI	3
CLOUD_WEBSOCKET	4	Websocket connection used to connect to remote cloud application

EventTypes

Name	Value	Description
PHONE_CALL	0	Phone call is active
EMERGENCY_EVENT	1	Active emergency event, active parking event
DEACTIVATE_HMI	2	GAL/DIO is active
AUDIO_SOURCE	3	Navigated to audio(radio, etc)
EMBEDDED_NAVI	4	Navigated to navigation screen

ButtonPressMode

Name	Value	Description
LONG	0	A button was released, after it was pressed for a long time. Actual timing is defined by head unit and may vary
SHORT	1	A button was released, after it was pressed for a short time. Actual timing is defined by head unit and may vary

VRCommandType

Name	Value	Description
Choice	0	Types that expound the current AddCommand should be processed as a choice for initiated PerformInteraction request for current active on HMI
Command	1	Types that expound the current AddCommand should be processed as a common command for current application on HMI

AppHMIType

Name	Value	Description
DEFAULT	0
COMMUNICATION	1
MEDIA	2
MESSAGING	3
NAVIGATION	4
INFORMATION	5
SOCIAL	6
BACKGROUND_PROCESS	7
TESTING	8
SYSTEM	9
PROJECTION	10
REMOTE_CONTROL	11

CloudConnectionStatus

Name	Value	Description
NOT_CONNECTED	0	No active websocket session or ongoing connection attempts
CONNECTED	1	Websocket is active
RETRY	2	Websocket connection failed and retry attempts are ongoing

WayPointType

Name	Value	Description
ALL	0	All waypoints including destination
DESTINATION	1	Only destination

SpeechCapabilities

Name	Value	Description
TEXT	0	Uses plain text for performing TTS
SAPI_PHONEMES	1	Uses the Speech API Phoneme representation of a phrase for performing TTS
LHPLUS_PHONEMES	2	Uses the LH+ Phoneme representation of a phrase for performing TTS
PRE_RECORDED	3
SILENCE	4
FILE	5	Uses an audio file sent to SDL via a PutFile RPC to perform TTS or play generic sounds in conjunction with TTS

TextFieldName

Name	Value	Description
mainField1	0	The first line of first set of main fields of the persistent display (applies to "Show")
mainField2	1	The second line of first set of main fields of the persistent display (applies to "Show")
mainField3	2	The first line of second set of main fields of persistent display (applies to "Show")
mainField4	3	The second line of second set of main fields of the persistent display (applies to "Show")
statusBar	4	The status bar on NGN (applies to "Show")
mediaClock	5	Text value for MediaClock field (applies to "Show")
mediaTrack	6	The track field of NGN and GEN1.1 MFD displays. This field is only available for media applications (applies to "Show")
templateTitle	7	The title of the new template that will be displayed; applies to "Show"
alertText1	8	The first line of the alert text field (applies to "Alert")
alertText2	9	The second line of the alert text field (applies to "Alert")
alertText3	10	The third line of the alert text field (applies to "Alert")
scrollableMessageBody	11	Long form body of text that can include newlines and tabs (applies to "ScrollableMessage")
initialInteractionText	12	First line suggestion for a user response (in the case of VR enabled interaction)
navigationText1	13	First line of navigation text
navigationText2	14	Second line of navigation text
ETA	15	Estimated Time of Arrival time for navigation
totalDistance	16	Total distance to destination for navigation
audioPassThruDisplayText1	17	First line of text for audio pass thru
audioPassThruDisplayText2	18	Second line of text for audio pass thru
sliderHeader	19	Header text for slider
sliderFooter	20	Footer text for slider
menuName	21	Primary text for Choice
secondaryText	22	Secondary text for Choice
tertiaryText	23	Tertiary text for Choice
menuTitle	24	Optional text to label an app menu button (for certain touchscreen platforms)
locationName	25	Optional name / title of intended location (applies to SendLocation)
locationDescription	26	Optional description of intended location / establishment (applies to SendLocation)
addressLines	27	Optional location address (applies to SendLocation)
phoneNumber	28	Optional phone number of intended location / establishment (applies to SendLocation)
timeToDestination	29
turnText	30
navigationText	31	Navigation text for UpdateTurnList
notificationText	32	Text of notification to be displayed on screen

MetadataType

Name	Value	Description
mediaTitle	0	This field contains the title of the current audio track.
mediaArtist	1	This field contains the artist/creator of the current audio track.
mediaAlbum	2	This field contains the album title of the current audio track.
mediaYear	3	This field contains the creation year of the current audio track.
mediaGenre	4	This field contains the genre of the current audio track.
mediaStation	5	This field contains the name of the current media source.
rating	6	This field contains a rating of some form.
currentTemperature	7	This field contains the current temperature.
maximumTemperature	8	This field contains the maximum temperature for the day.
minimumTemperature	9	This field contains the minimum temperature for the day.
weatherTerm	10	This field contains the current weather (cloudy, clear, etc.).
humidity	11	This field contains the current humidity value.

AmbientLightStatus

Name	Value	Description
NIGHT	0
TWILIGHT_1	1
TWILIGHT_2	2
TWILIGHT_3	3
TWILIGHT_4	4
DAY	5
UNKNOWN	6
INVALID	7

StatisticsType

Name	Value	Description
iAPP_BUFFER_FULL	0

VehicleDataEventStatus

Name	Value	Description
NO_EVENT	0	The system does not have the adequate information to send valid YES or NO states
NO	1	The requested event is in NO state
YES	2	The requested event is in YES state
NOT_SUPPORTED	3	The requested data is not supported
FAULT	4	The module/sensor is currently faulty

KeyboardLayout

Name	Value	Description
QWERTY	0
QWERTZ	1
AZERTY	2

MenuLayout

Name	Value	Description
LIST	0
TILES	1

ButtonEventMode

Name	Value	Description
BUTTONUP	0	A button has been released
BUTTONDOWN	1	A button has been pressed

VrCapabilities

Name	Value	Description
TEXT	0

TextAlignment

Name	Value	Description
LEFT_ALIGNED	0
RIGHT_ALIGNED	1
CENTERED	2

DeviceState

Name	Value	Description
UNKNOWN	0
UNPAIRED	1

SystemContext

Name	Value	Description
MAIN	0	The app's persistent display (whether media/non-media/navigation) is fully visible onscreen There is currently no user interaction (user-initiated or app-initiated) with the head-unit
VRSESSION	1	The system is currently in a VR session (with whatever dedicated VR screen being overlaid onscreen)
MENU	2	The system is currently displaying a system or in-App menu onscreen
HMI_OBSCURED	3	The app's display HMI is currently obscuring with either a system or other app's overlay (except of Alert element)
ALERT	4	Broadcast only to whichever app has an alert currently being displayed

SoftButtonType

Name	Value	Description
TEXT	0
IMAGE	1
BOTH	2

DriverDistractionState

Name	Value	Description
DD_ON	0
DD_OFF	1

MethodName

Name	Value	Description
ALERT	0
SPEAK	1
AUDIO_PASS_THRU	2
ALERT_MANEUVER	3

CharacterSet

Name	Value	Description
TYPE2SET	0
TYPE5SET	1
CID1SET	2
CID2SET	3

SamplingRate

Name	Value	Description
8KHZ	0	Sampling rate of 8000 Hz
16KHZ	1	Sampling rate of 16000 Hz
22KHZ	2	Sampling rate of 22050 Hz
44KHZ	3	Sampling rate of 44100 Hz

PrerecordedSpeech

Name	Value	Description
HELP_JINGLE	0
INITIAL_JINGLE	1
LISTEN_JINGLE	2
POSITIVE_JINGLE	3
NEGATIVE_JINGLE	4

MediaClockFormat

Name	Value	Description
CLOCK1	0	minutesFieldWidth = 2 minutesFieldMax = 19 secondsFieldWidth = 2 secondsFieldMax = 99 maxHours = 19 maxMinutes = 59 maxSeconds = 59 Is used for Type II, NGN and CID head units
CLOCK2	1	minutesFieldWidth = 3 minutesFieldMax = 199 secondsFieldWidth = 2 secondsFieldMax = 99 maxHours = 59 maxMinutes = 59 maxSeconds = 59 Is used for Type V head units
CLOCK3	2	minutesFieldWidth = 2 minutesFieldMax = 59 secondsFieldWidth = 2 secondsFieldMax = 59 maxHours = 9 maxMinutes = 59 maxSeconds = 59 Is used for GEN1.1 (i.e. MFD3/4/5) head units
CLOCKTEXT1	3	5 characters possible Format: 1|sp c :|sp c c 1|sp : digit "1" or space c : character out of following character set: sp|0-9|[letters] :|sp : colon or space Is used for Type II head unit
CLOCKTEXT2	4	5 chars possible Format: 1|sp c :|sp c c 1|sp : digit "1" or space c : character out of following character set: sp|0-9|[letters] :|sp : colon or space Is used for CID and NGN head unit
CLOCKTEXT3	5	6 chars possible Format: 1|sp c c :|sp c c 1|sp : digit "1" or space c : character out of following character set: sp|0-9|[letters] :|sp : colon or space Is used for Type V head unit
CLOCKTEXT4	6	6 chars possible Format: c :|sp c c : c c :|sp : colon or space c : character out of following character set: sp|0-9|[letters]. Is used for GEN1.1 (i.e. MFD3/4/5) head units

TouchType

Name	Value	Description
BEGIN	0
MOVE	1
END	2
CANCEL	3

HmiZoneCapabilities

Name	Value	Description
FRONT	0
BACK	1

AlertType

Name	Value	Description
UI	0
BOTH	1

ECallConfirmationStatus

Name	Value	Description
NORMAL	0
CALL_IN_PROGRESS	1
CALL_CANCELLED	2
CALL_COMPLETED	3
CALL_UNSUCCESSFUL	4
ECALL_CONFIGURED_OFF	5
CALL_COMPLETE_DTMF_TIMEOUT	6

ClockUpdateMode

Name	Value	Description
COUNTUP	0
COUNTDOWN	1
PAUSE	2
RESUME	3
CLEAR	4

DeviceLevelStatus

Name	Value	Description
ZERO_LEVEL_BARS	0
ONE_LEVEL_BARS	1
TWO_LEVEL_BARS	2
THREE_LEVEL_BARS	3
FOUR_LEVEL_BARS	4
NOT_PROVIDED	5

SystemAction

Name	Value	Description
DEFAULT_ACTION	0	Default action occurs. Standard behavior (e.g. SoftButton clears overlay)
STEAL_FOCUS	1	The calling app's dialog or related event should clear and the app should be brought into HMI_FULL
KEEP_CONTEXT	2	Current system context is maintained. An overlay is persisted even though a SoftButton has been pressed and the notification sent

ButtonName

Name	Value	Description
OK	0
PLAY_PAUSE	1
SEEKLEFT	2
SEEKRIGHT	3
TUNEUP	4
TUNEDOWN	5
PRESET_0	6
PRESET_1	7
PRESET_2	8
PRESET_3	9
PRESET_4	10
PRESET_5	11
PRESET_6	12
PRESET_7	13
PRESET_8	14
PRESET_9	15
CUSTOM_BUTTON	16
SEARCH	17
AC_MAX	18	CLIMATE Module
AC	19	CLIMATE Module
RECIRCULATE	20	CLIMATE Module
FAN_UP	21	CLIMATE Module
FAN_DOWN	22	CLIMATE Module
TEMP_UP	23	CLIMATE Module
TEMP_DOWN	24	CLIMATE Module
DEFROST_MAX	25	CLIMATE Module
DEFROST	26	CLIMATE Module
DEFROST_REAR	27	CLIMATE Module
UPPER_VENT	28	CLIMATE Module
LOWER_VENT	29	CLIMATE Module
VOLUME_UP	30	RADIO Module
VOLUME_DOWN	31	RADIO Module
EJECT	32	RADIO Module
SOURCE	33	RADIO Module
SHUFFLE	34	RADIO Module
REPEAT	35	RADIO Module
NAV_CENTER_LOCATION	36	Navigation Subscription Button
NAV_ZOOM_IN	37	Navigation Subscription Button
NAV_ZOOM_OUT	38	Navigation Subscription Button
NAV_PAN_UP	39	Navigation Subscription Button
NAV_PAN_UP_RIGHT	40	Navigation Subscription Button
NAV_PAN_RIGHT	41	Navigation Subscription Button
NAV_PAN_DOWN_RIGHT	42	Navigation Subscription Button
NAV_PAN_DOWN	43	Navigation Subscription Button
NAV_PAN_DOWN_LEFT	44	Navigation Subscription Button
NAV_PAN_LEFT	45	Navigation Subscription Button
NAV_PAN_UP_LEFT	46	Navigation Subscription Button
NAV_TILT_TOGGLE	47	Navigation Subscription Button
NAV_ROTATE_CLOCKWISE	48	Navigation Subscription Button
NAV_ROTATE_COUNTERCLOCKWISE	49	Navigation Subscription Button
NAV_HEADING_TOGGLE	50	Navigation Subscription Button

KeypressMode

Name	Value	Description
SINGLE_KEYPRESS	0	Each keyPress is individually sent as the user presses the keyboard keys
QUEUE_KEYPRESSES	1	The keyPresses are queued and a string is eventually sent once the user chooses to submit their entry
RESEND_CURRENT_ENTRY	2	The keyPresses are queue and a string is sent each time the user presses a keyboard key; the string contains the entire current entry

WiperStatus

Name	Value	Description
OFF	0	The wipers are off
AUTO_OFF	1	The wipers are automatically off
OFF_MOVING	2	Means that though set to off, somehow the wipers have been engaged (physically moved enough to engage a wiping motion)
MAN_INT_OFF	3	The wipers are manually off after having been working
MAN_INT_ON	4	The wipers are manually on
MAN_LOW	5	The wipers are manually set to low speed
MAN_HIGH	6	The wipers are manually set to high speed
MAN_FLICK	7	The wipers are manually set for doing a flick
WASH	8	The wipers are set to use the water from vehicle washer bottle for cleaning the windscreen
AUTO_LOW	9	The wipers are automatically set to low speed
AUTO_HIGH	10	The wipers are automatically set to high speed
COURTESYWIPE	11	This is for when a user has just initiated a WASH and several seconds later a secondary wipe is automatically initiated to clear remaining fluid
AUTO_ADJUST	12	This is set as the user moves between possible automatic wiper speeds
STALLED	13	The wiper is stalled to its place
NO_DATA_EXISTS	14	The sensor / module cannot provide any information for wiper

LayoutMode

Name	Value	Description
ICON_ONLY	0
ICON_WITH_SEARCH	1
LIST_ONLY	2
LIST_WITH_SEARCH	3
KEYBOARD	4

Language

Name	Value	Description
EN-US	0	English - US
ES-MX	1	Spanish - Mexico
FR-CA	2	French - Canada
DE-DE	3	German - Germany
ES-ES	4	Spanish - Spain
EN-GB	5	English - GB
RU-RU	6	Russian - Russia
TR-TR	7	Turkish - Turkey
PL-PL	8	Polish - Poland
FR-FR	9	French - France
IT-IT	10	Italian - Italy
SV-SE	11	Swedish - Sweden
PT-PT	12	Portuguese - Portugal
NL-NL	13	Dutch (Standard) - Netherlands
EN-AU	14	English - Australia
ZH-CN	15	Mandarin - China
ZH-TW	16	Mandarin - Taiwan
JA-JP	17	Japanese - Japan
AR-SA	18	Arabic - Saudi Arabia
KO-KR	19	Korean - South Korea
PT-BR	20	Portuguese - Brazil
CS-CZ	21	Czech - Czech Republic
DA-DK	22	Danish - Denmark
NO-NO	23	Norwegian - Norway
NL-BE	24	Dutch (Flemish) - Belgium
EL-GR	25	Greek - Greece
HU-HU	26	Hungarian - Hungary
FI-FI	27	Finnish - Finland
SK-SK	28	Slovak - Slovakia
EN-IN	29	English - India
TH-TH	30	Thai - Thailand
EN-SA	31	English - Middle East
HE-IL	32	Hebrew - Israel
RO-RO	33	Romanian - Romania
UK-UA	34	Ukrainian - Ukraine
ID-ID	35	Indonesian - Indonesia
VI-VN	36	Vietnamese - Vietnam
MS-MY	37	Malay - Malaysia
HI-IN	38	Hindi - India

FileType

Name	Value	Description
GRAPHIC_BMP	0
GRAPHIC_JPEG	1
GRAPHIC_PNG	2
AUDIO_WAVE	3
AUDIO_MP3	4
AUDIO_AAC	5
BINARY	6
JSON	7

AudioType

Name	Value	Description
PCM	0	Linear PCM

TBTState

Name	Value	Description
ROUTE_UPDATE_REQUEST	0
ROUTE_ACCEPTED	1
ROUTE_REFUSED	2
ROUTE_CANCELLED	3
ETA_REQUEST	4
NEXT_TURN_REQUEST	5
ROUTE_STATUS_REQUEST	6
ROUTE_SUMMARY_REQUEST	7
TRIP_STATUS_REQUEST	8
ROUTE_UPDATE_REQUEST_TIMEOUT	9

VehicleDataResultCode

Name	Value	Description
SUCCESS	0
TRUNCATED_DATA	1
DISALLOWED	2
USER_DISALLOWED	3
INVALID_ID	4
VEHICLE_DATA_NOT_AVAILABLE	5
DATA_ALREADY_SUBSCRIBED	6
DATA_NOT_SUBSCRIBED	7
IGNORED	8

DisplayType

Name	Value	Description
CID	0	A 2-line x 20 character "dot matrix" display
TYPE2	1	1 line older radio head unit
TYPE5	2	Old radio head unit
NGN	3	Next Generation Navigation display
GEN2_8_DMA	4	GEN-2, 8 inch display
GEN2_6_DMA	5	GEN-2, 6 inch display
MFD3	6	3 inch GEN1.1 display
MFD4	7	4 inch GEN1.1 display
MFD5	8	5 inch GEN1.1 display
GEN3_8_INCH	9
SDL_GENERIC	10

ApplicationExitReason

Name	Value	Description
DRIVER_DISTRACTION_VIOLATION	0	By getting this value, SDL puts the named app to NONE HMILevel
USER_EXIT	1	By getting this value, SDL puts the named app to NONE HMILevel
UNAUTHORIZED_TRANSPORT_REGISTRATION	2	By getting this value, SDL unregisters the named application
UNSUPPORTED_HMI_RESOURCE	3	By getting this value, SDL unregisters the named application
CLOSE_CLOUD_CONNECTION	4	By getting this value, SDL puts the named app to NONE HMILevel. Used by the HMI to close a cloud app connection

IgnitionStatus

Name	Value	Description
UNKNOWN	0	The information is not acceptable
OFF	1	The ignition is off
ACCESSORY	2	The accessories are active (power windows, audio, display, etc.)
RUN	3	Ignition is active
START	4	Starter is switched
INVALID	5	The data is provided, but there is some sort of fault or problem

EmergencyEventType

Name	Value	Description
NO_EVENT	0
FRONTAL	1
SIDE	2
REAR	3
ROLLOVER	4
NOT_SUPPORTED	5
FAULT	6

HMILevel

Name	Value	Description
FULL	0
LIMITED	1
BACKGROUND	2
NONE	3

AppPriority

Name	Value	Description
EMERGENCY	0
NAVIGATION	1
VOICE_COMMUNICATION	2
COMMUNICATION	3
NORMAL	4
NONE	5

PowerModeQualificationStatus

Name	Value	Description
POWER_MODE_UNDEFINED	0
POWER_MODE_EVALUATION_IN_PROGRESS	1
NOT_DEFINED	2
POWER_MODE_OK	3

ApplicationsCloseReason

Name	Value	Description
IGNITION_OFF	0
MASTER_RESET	1
FACTORY_DEFAULTS	2
SUSPEND	3

Dimension

Name	Value	Description
NO_FIX	0	No GPS at all
2D	1	Longitude and lattitude
3D	2	Longitude and lattitude and altitude

ImageType

Name	Value	Description
STATIC	0
DYNAMIC	1

AudioStreamingIndicator

Name	Value	Description
PLAY_PAUSE	0	Default playback indicator.
PLAY	1	Indicates that a button press of the Play/Pause button would start the playback.
PAUSE	2	Indicates that a button press of the Play/Pause button would pause the current playback.
STOP	3	Indicates that a button press of the Play/Pause button would stop the current playback.

IgnitionStableStatus

Name	Value	Description
IGNITION_SWITCH_NOT_STABLE	0
IGNITION_SWITCH_STABLE	1
MISSING_FROM_TRANSMITTER	2	Either the data is not accessible or the sensor is broken

WarningLightStatus

Name	Value	Description
OFF	0
ON	1
FLASH	2
NOT_USED	3

VehicleDataNotificationStatus

Name	Value	Description
NOT_SUPPORTED	0
NORMAL	1
ACTIVE	2
NOT_USED	3

SystemError

Name	Value	Description
SYNC_REBOOTED	0
SYNC_OUT_OF_MEMMORY	1

PowerModeStatus

Name	Value	Description
KEY_OUT	0
KEY_RECENTLY_OUT	1
KEY_APPROVED_0	2
POST_ACCESORY_0	3
ACCESORY_1	4
POST_IGNITION_1	5
IGNITION_ON_2	6
RUNNING_2	7
CRANK_3	8

ComponentVolumeStatus

Name	Value	Description
UNKNOWN	0	The data is unknown
NORMAL	1	The volume is normal
LOW	2	The volume is low
FAULT	3	The module/sensor is currently faulted
ALERT	4	The component`s volume is in critical level
NOT_SUPPORTED	5	The data is not supported

PrimaryAudioSource

Name	Value	Description
NO_SOURCE_SELECTED	0
CD	1
USB	2
USB2	3
BLUETOOTH_STEREO_BTST	4
LINE_IN	5
IPOD	6
MOBILE_APP	7
AM	8
FM	9
XM	10
DAB	11

RequestType

Name	Value	Description
HTTP	0
FILE_RESUME	1
AUTH_REQUEST	2
AUTH_CHALLENGE	3
AUTH_ACK	4
PROPRIETARY	5
QUERY_APPS	6
LAUNCH_APP	7
LOCK_SCREEN_ICON_URL	8
TRAFFIC_MESSAGE_CHANNEL	9
DRIVER_PROFILE	10
VOICE_SEARCH	11
NAVIGATION	12
PHONE	13
CLIMATE	14
SETTINGS	15
VEHICLE_DIAGNOSTICS	16
EMERGENCY	17
MEDIA	18
FOTA	19
OEM_SPECIFIC	20
ICON_URL	21

ConsentSource

Name	Value	Description
GUI	0
VUI	1

CompassDirection

Name	Value	Description
NORTH	0
NORTHWEST	1
WEST	2
SOUTHWEST	3
SOUTH	4
SOUTHEAST	5
EAST	6
NORTHEAST	7

BitsPerSample

Name	Value	Description
8_BIT	0	Audio sample is 8 bits wide, unsigned
16_BIT	1	Audio sample is 16 bits wide, signed, and in little endian

EmergencyState

Name	Value	Description
EMERGENCY_ON	0
EMERGENCY_OFF	1

Result

Name	Value	Description
SUCCESS	0
UNSUPPORTED_REQUEST	1
UNSUPPORTED_RESOURCE	2	If this response is returned to core and the related HMI interface state is not available, core will return success:false to mobile. Otherwise core will return success:true
DISALLOWED	3
REJECTED	4
ABORTED	5
IGNORED	6
RETRY	7
IN_USE	8
DATA_NOT_AVAILABLE	9
TIMED_OUT	10
INVALID_DATA	11
CHAR_LIMIT_EXCEEDED	12
INVALID_ID	13
DUPLICATE_NAME	14
APPLICATION_NOT_REGISTERED	15
WRONG_LANGUAGE	16
OUT_OF_MEMORY	17
TOO_MANY_PENDING_REQUESTS	18
NO_APPS_REGISTERED	19
NO_DEVICES_CONNECTED	20
WARNINGS	21
GENERIC_ERROR	22
USER_DISALLOWED	23
TRUNCATED_DATA	24
SAVED	25
READ_ONLY	26

CarModeStatus

Name	Value	Description
NORMAL	0
FACTORY	1
TRANSPORT	2
CRASH	3

ImageFieldName

Name	Value	Description
softButtonImage	0	The image field for SoftButton
choiceImage	1	The first image field for Choice
choiceSecondaryImage	2	The secondary image field for Choice
vrHelpItem	3	The image field for vrHelpItem
turnIcon	4	The image field for Turn
menuIcon	5	The image field for the menu icon in SetGlobalProperties
cmdIcon	6	The image field for AddCommand
appIcon	7	The image field for the app icon (set by setAppIcon)
graphic	8	The primary image field for Show
secondaryGraphic	9	The secondary image field for Show
showConstantTBTIcon	10	The primary image field for ShowConstantTBT
showConstantTBTNextTurnIcon	11	The secondary image field for ShowConstantTBT
locationImage	12	The optional image of a destination / location
alertIcon	13	The image field for Alert

VehicleDataType

Name	Value	Description
VEHICLEDATA_GPS	0	Notifies GPSData may be subscribed
VEHICLEDATA_SPEED	1
VEHICLEDATA_RPM	2
VEHICLEDATA_FUELLEVEL	3
VEHICLEDATA_FUELLEVEL_STATE	4
VEHICLEDATA_FUELCONSUMPTION	5
VEHICLEDATA_EXTERNTEMP	6
VEHICLEDATA_VIN	7
VEHICLEDATA_PRNDL	8
VEHICLEDATA_TIREPRESSURE	9
VEHICLEDATA_ODOMETER	10
VEHICLEDATA_BELTSTATUS	11
VEHICLEDATA_BODYINFO	12
VEHICLEDATA_DEVICESTATUS	13
VEHICLEDATA_ECALLINFO	14
VEHICLEDATA_AIRBAGSTATUS	15
VEHICLEDATA_EMERGENCYEVENT	16
VEHICLEDATA_CLUSTERMODESTATUS	17
VEHICLEDATA_MYKEY	18
VEHICLEDATA_BRAKING	19
VEHICLEDATA_WIPERSTATUS	20
VEHICLEDATA_HEADLAMPSTATUS	21
VEHICLEDATA_BATTVOLTAGE	22
VEHICLEDATA_ENGINETORQUE	23
VEHICLEDATA_ACCPEDAL	24
VEHICLEDATA_STEERINGWHEEL	25
VEHICLEDATA_TURNSIGNAL	26
VEHICLEDATA_FUELRANGE	27
VEHICLEDATA_ENGINEOILLIFE	28
VEHICLEDATA_ELECTRONICPARKBRAKESTATUS	29
VEHICLEDATA_CLOUDAPPVEHICLEID	30	Parameter used by cloud apps or the policy server to identify a head unit
VEHICLEDATA_OEM_CUSTOM_DATA	31

VideoStreamingProtocol

Name	Value	Description
RAW	0	Raw stream bytes
RTP	1	Real-time Transport Protocol
RTSP	2	Real-time Streaming Protocol
RTMP	3	Real-Time Messaging Protocol
WEBM	4	WebM container

VideoStreamingCodec

Name	Value	Description
H264	0	MPEG-4 Advanced Video Coding
H265	1	High Efficiency Video Coding
Theora	2	Ogg Theora
VP8	3	VP8 can be multiplexed into the Matroska-based container format WebM along with Vorbis and Opus audio. The image format WebP is based on VP8's intra-frame coding
VP9	4	Similar to VP8, but VP9 is customized for video resolutions beyond high-definition video (UHD) and also enables lossless compression

UpdateResult

Name	Value	Description
UP_TO_DATE	0
UPDATING	1
UPDATE_NEEDED	2

PRNDL

Name	Value	Description
PARK	0	Parking
REVERSE	1	Reverse gear
NEUTRAL	2	No gear
DRIVE	3
SPORT	4	Drive Sport mode
LOWGEAR	5	1st gear hold
FIRST	6
SECOND	7
THIRD	8
FOURTH	9
FIFTH	10
SIXTH	11
SEVENTH	12
EIGHTH	13
UNKNOWN	14
FAULT	15

TPMS

Name	Value	Description
UNKNOWN	0	If set the status of the tire is not known.
SYSTEM_FAULT	1	TPMS does not function.
SENSOR_FAULT	2	The sensor of the tire does not function.
LOW	3	TPMS is reporting a low tire pressure for the tire.
SYSTEM_ACTIVE	4	TPMS is active and the tire pressure is monitored.
TRAIN	5	TPMS is reporting that the tire must be trained.
TRAINING_COMPLETE	6	TPMS reports the training for the tire is completed.
NOT_TRAINED	7	TPMS reports the tire is not trained.

VehicleDataStatus

Name	Value	Description
NO_DATA_EXISTS	0
OFF	1
ON	2

ModuleType

Name	Value	Description
CLIMATE	0
RADIO	1
SEAT	2
AUDIO	3
LIGHT	4
HMI_SETTINGS	5

RadioBand

Name	Value	Description
AM	0
FM	1
XM	2

RadioState

Name	Value	Description
ACQUIRING	0
ACQUIRED	1
MULTICAST	2
NOT_FOUND	3

TemperatureUnit

Name	Value	Description
FAHRENHEIT	0
CELSIUS	1

DefrostZone

Name	Value	Description
FRONT	0
REAR	1
ALL	2
NONE	3

VentilationMode

Name	Value	Description
UPPER	0
LOWER	1
BOTH	2
NONE	3

RCAccessMode

Name	Value	Description
AUTO_ALLOW	0	Any RC app can take immediately gain control a module when it is requested
AUTO_DENY	1	An RC app has control of a module until the app releases it, all requests for control of the module by other apps are rejected
ASK_DRIVER	2	The driver is prompted when an app requests control of a module that is currently being used

EntityStatus

Name	Value	Description
ON	0
OFF	1

FuelType

Name	Value	Description
GASOLINE	0
DIESEL	1
CNG	2	For vehicles using compressed natural gas
LPG	3	For vehicles using liquefied petroleum gas
HYDROGEN	4	For FCEV (fuel cell electric vehicle)
BATTERY	5	For BEV (Battery Electric Vehicle), PHEV (Plug-in Hybrid Electric Vehicle), solar vehicles and other vehicles which run on a battery

TurnSignal

Name	Value	Description
OFF	0	Turn signal is OFF
LEFT	1	Left turn signal is on
RIGHT	2	Right turn signal is on
BOTH	3	Both signals (left and right) are on

ElectronicParkBrakeStatus

Name	Value	Description
CLOSED	0	Park brake actuators have been fully applied.
TRANSITION	1	Park brake actuators are transitioning to either Apply/Closed or Release/Open state.
OPEN	2	Park brake actuators are released.
DRIVE_ACTIVE	3	When driver pulls the Electronic Park Brake switch while driving "at speed".
FAULT	4	When system has a fault or is under maintenance.

LightName

Name	Value	Description
FRONT_LEFT_HIGH_BEAM	0
FRONT_RIGHT_HIGH_BEAM	1
FRONT_LEFT_LOW_BEAM	2
FRONT_RIGHT_LOW_BEAM	3
FRONT_LEFT_PARKING_LIGHT	4
FRONT_RIGHT_PARKING_LIGHT	5
FRONT_LEFT_FOG_LIGHT	6
FRONT_RIGHT_FOG_LIGHT	7
FRONT_LEFT_DAYTIME_RUNNING_LIGHT	8
FRONT_RIGHT_DAYTIME_RUNNING_LIGHT	9
FRONT_LEFT_TURN_LIGHT	10
FRONT_RIGHT_TURN_LIGHT	11
REAR_LEFT_FOG_LIGHT	12
REAR_RIGHT_FOG_LIGHT	13
REAR_LEFT_TAIL_LIGHT	14
REAR_RIGHT_TAIL_LIGHT	15
REAR_LEFT_BRAKE_LIGHT	16
REAR_RIGHT_BRAKE_LIGHT	17
REAR_LEFT_TURN_LIGHT	18
REAR_RIGHT_TURN_LIGHT	19
REAR_REGISTRATION_PLATE_LIGHT	20
HIGH_BEAMS	501	Include all high beam lights: front_left and front_right
LOW_BEAMS	502	Include all low beam lights: front_left and front_right
FOG_LIGHTS	503	Include all fog lights: front_left, front_right, rear_left and rear_right
RUNNING_LIGHTS	504	Include all daytime running lights: front, left and right
PARKING_LIGHTS	505	Include all parking lights: front_left and front_right
BRAKE_LIGHTS	506	Include all brake lights: rear_left and rear_right
REAR_REVERSING_LIGHTS	507
SIDE_MARKER_LIGHTS	508
LEFT_TURN_LIGHTS	509	Include all left turn signal lights: front_left, rear_left, left_side and mirror_mounted
RIGHT_TURN_LIGHTS	510	Include all right turn signal lights: front_right, rear_right, right_side and mirror_mounted
HAZARD_LIGHTS	511	Include all hazard lights: front_left, front_right, rear_left and rear_right
REAR_CARGO_LIGHTS	512	Cargo lamps illuminate the cargo area.
REAR_TRUCK_BED_LIGHTS	513	Truck bed lamps light up the bed of the truck.
REAR_TRAILER_LIGHTS	514	Trailer lights are lamps mounted on a trailer hitch.
LEFT_SPOT_LIGHTS	515	It is the spotlights mounted on the left side of a vehicle.
RIGHT_SPOT_LIGHTS	516	It is the spotlights mounted on the right side of a vehicle.
LEFT_PUDDLE_LIGHTS	517	Puddle lamps illuminate the ground beside the door as the customer is opening or approaching the door.
RIGHT_PUDDLE_LIGHTS	518	Puddle lamps illuminate the ground beside the door as the customer is opening or approaching the door.
AMBIENT_LIGHTS	801
OVERHEAD_LIGHTS	802
READING_LIGHTS	803
TRUNK_LIGHTS	804
EXTERIOR_FRONT_LIGHTS	901	Include exterior lights located in front of the vehicle. For example, fog lights and low beams
EXTERIOR_REAR_LIGHTS	902	Include exterior lights located at the back of the vehicle. For example, license plate lights, reverse lights, cargo lights, bed lights an trailer assist lights
EXTERIOR_LEFT_LIGHTS	903	Include exterior lights located at the left side of the vehicle. For example, left puddle lights and spot lights
EXTERIOR_RIGHT_LIGHTS	904	Include exterior lights located at the right side of the vehicle. For example, right puddle lights and spot lights
EXTERIOR_ALL_LIGHTS	905	Include all exterior lights around the vehicle

LightStatus

Name	Value	Description
ON	0
OFF	1
RAMP_UP	2
RAMP_DOWN	3
UNKNOWN	4
INVALID	5

DisplayMode

Name	Value	Description
DAY	0
NIGHT	1
AUTO	2

DistanceUnit

Name	Value	Description
MILES	0
KILOMETERS	1

MassageZone

Name	Value	Description
LUMBAR	0	The back of a multi-contour massage seat. or SEAT_BACK
SEAT_CUSHION	1	The bottom a multi-contour massage seat. or SEAT_BOTTOM

MassageMode

Name	Value	Description
OFF	0
LOW	1
HIGH	2

MassageCushion

Name	Value	Description
TOP_LUMBAR	0
MIDDLE_LUMBAR	1
BOTTOM_LUMBAR	2
BACK_BOLSTERS	3
SEAT_BOLSTERS	4

SeatMemoryActionType

Name	Value	Description
SAVE	0	Save current seat positions and settings to seat memory.
RESTORE	1	Restore / apply the seat memory settings to the current seat.
NONE	2	No action to be performed.

SupportedSeat

Name	Value	Description
DRIVER	0
FRONT_PASSENGER	1

DeliveryMode

Name	Value	Description
PROMPT	0
DESTINATION	1
QUEUE	2

AppServiceType

Name	Value	Description
MEDIA	0
WEATHER	1
NAVIGATION	2

ServiceUpdateReason

Name	Value	Description
PUBLISHED	0	The service has just been published with the module and once activated to the primary service of its type, it will be ready for possible consumption
REMOVED	1	The service has just been unpublished with the module and is no longer accessible
ACTIVATED	2	The service is activated as the primary service of this type. All requests dealing with this service type will be handled by this service
DEACTIVATED	3	The service has been deactivated as the primary service of its type
MANIFEST_UPDATE	4	The service has updated its manifest. This could imply updated capabilities. Note: Currently unimplemented

SystemCapabilityType

Name	Value	Description
NAVIGATION	0
PHONE_CALL	1
VIDEO_STREAMING	2
REMOTE_CONTROL	3
APP_SERVICES	4
DISPLAYS	5
SEAT_LOCATION	6

MediaType

Name	Value	Description
MUSIC	0
PODCAST	1
AUDIOBOOK	2
OTHER	3

NavigationAction

Name	Value	Description
TURN	0	Using this action plus a supplied direction can give the type of turn
EXIT	1
STAY	2
MERGE	3
FERRY	4
CAR_SHUTTLE_TRAIN	5
WAYPOINT	6

NavigationJunction

Name	Value	Description
REGULAR	0	A junction that represents a standard intersection with a single road crossing another
BIFURCATION	1	A junction where the road splits off into two paths; a fork in the road
MULTI_CARRIAGEWAY	2	A junction that has multiple intersections and paths
ROUNDABOUT	3	A junction where traffic moves in a single direction around a central, non-traversable point to reach one of the connecting roads
TRAVERSABLE_ROUNDABOUT	4	Similar to a roundabout, however the center of the roundabout is fully traversable. Also known as a mini-roundabout
JUGHANDLE	5	A junction where lefts diverge to the right, then curve to the left, converting a left turn to a crossing maneuver
ALL_WAY_YIELD	6	Multiple way intersection that allows traffic to flow based on priority; most commonly right of way and first in, first out
TURN_AROUND	7	A junction designated for traffic turnarounds

Direction

Name	Value	Description
LEFT	0
RIGHT	1

WindowType

Name	Value	Description
MAIN	0	This window type describes the main window on a display
WIDGET	1	A widget is a small window that the app can create to provide information and soft buttons for quick app control

PredefinedWindows

Name	Value	Description
DEFAULT_WINDOW	0	The default window is a main window pre-created on behalf of the app
PRIMARY_WIDGET	1	The primary widget of the app

ServiceType

Name	Value	Description
VIDEO	0	Refers to the Video service.
AUDIO	1	Refers to the Audio service.
RPC	2	Refers to RPC service.

ServiceEvent

Name	Value	Description
REQUEST_RECEIVED	0	When a request for a Service is received.
REQUEST_ACCEPTED	1	When a request for a Service is accepted.
REQUEST_REJECTED	2	When a request for a Service is rejected.

ServiceStatusUpdateReason

Name	Value	Description
PTU_FAILED	0	When a Service is rejected because the system was unable to get a required Policy Table Update.
INVALID_CERT	1	When a Service is rejected because the security certificate is invalid/expired.
INVALID_TIME	2	When a Service is rejected because the system was unable to get a valid SystemTime from HMI, which is required for certificate authentication.
PROTECTION_ENFORCED	3	When a Service is rejected because the system configuration ini file requires the service must be protected, but the app asks for an unprotected service.
PROTECTION_DISABLED	4	When a mobile app requests a protected service, but the system starts an unprotected service instead.

View on GitHub.com